Graco 9126 Manual De Usuario

363-7-99

Toy Bag

(on certain models)

Toy bag snaps on end of

unit. Maximum weight 2 lbs

(0.9 kg).
DO NOT machine wash or dry

in a dryer. DO NOT dry clean.

Spot clean with a damp cloth

and a mild detergent. NO

BLEACH.

At first your Pack N Play may

be like a new pair of shoes.

You may need to break it in by

slightly stretching the netting

and fabric. If the center does not

stay down, place some weight

(several books) in the center of

the unit and let it stand

overnight.

Step 5.

Place the mattress into your

unit with padded side up.
Always use your unit with

mattress installed soft side up.
Slide the two

VELCRO

straps

through slots in bottom of Pack

N Play and fasten to

VELCRO

on underside. This will prevent

mattress from moving.
Your Pack N Play is ready to

use.

Side Flap

(on certain models)

You can raise side flap if

desired.
Unfasten

VELCRO

straps at

bottom of flap. Roll flap up.

Fasten in place with snap loops

at top.

To Use Your Changing Table

(on certain models)

Parts List

CHECK that you have all parts listed below

BEFORE assembling your changing table.

No tools required.

Long tube (2)

Short tube (2)

Changing pad

Accessory bag

Changing

table

To protect your child from falls and other injuries:
Always stay within arms reach of your child when

using the changing table. Always use waist belt when

child is on the changing table. Never leave child

unattended.

 The changing table is designed for use only with this

Graco Pack N Play. Do not attempt to use it with any

other product. Before each use, make sure the

changing table is properly secured to the Pack N Play

by pushing down firmly in the middle of the changing

table. The changing table should not fall.

 Do not use the changing table as a sleeping or play

area.

 Weight limit for the changing table is 25 pounds

(11 kg). Do not use the changing table as extra

storage. Always remove the changing table when

your child is in the Pack N Play.

 The Pack N Play changing table can be used on the

floor without being attached to the Pack N Play.

Never place the changing table on a piece of furniture,

bed, counter or any raised surface from which the

changing table or your child could fall.

Step 1.

Lay changing table flat on floor with short side in front

of you and belt facing up. Gently slide one long tube into

opening on long side exactly as shown.
Repeat on other long side.

Step 2.

Slide one short tube

into opening on end

as shown.

Be sure folding side of

hinge faces pad as

shown.

DO NOT insert other

short tube at this time.

Fold side

of hinge

Long

side

Short side

Step 3.

Turn up long tube so

that its end points down.
Insert end of long tube

into opening on end of

short tube as shown.

DO NOT slide short

tube up around the bend

of long tube until you

have finished next step.

Make sure fabric does not get caught in opening when

inserting long tube into short tube.

Step 4.

Repeat step 3 on other

end of short tube, then

slide short tube ends

up onto long tubes.

TO AVOID TEARING

FABRIC, slide the

short end up before

proceeding with

step 5.

Step 5.

Now repeat steps

2, 3 and 4 on how to

install the short tube

on the other end of

the changing table.

If the short tubes

have been inserted

correctly, the

changing table should

be able to FOLD UP in

the center as shown.

If you cannot fold the

tubes up in the center,

review steps 2, 3, and 4.

Step 6.

Place pad in changing

table with vinyl side up.

Pull belt straps through

holes in center of pad.

Step 7.

Insert

VELCRO

straps

into the four slots at

the corners of changing

table and attach to

VELCRO

on underside

of changing table. This

will prevent pad from

moving.

Step 8.

Place changing table on

Pack N Play as shown.

Make sure tubes are

placed securely over

the sides of the

Pack N Play

Check that the

changing table is

properly supported by the

Pack N Play

by pushing

firmly down into center of

changing table.

Short tube side

Slide ends up

Fold up