Cisco Systems DHR-1 Manual De Usuario

To debug events related to the OIR daemon (OIRD), use the debug oird command in EXEC mode. To 
disable debugging, use the no form of this command.

debug oird {all | event | message}

no debug oird {all | event | message}

No default behavior or values

EXEC

To use this command, you must be in a user group associated with a task group that includes the proper 
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on 
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Debugging output is assigned high priority in the CPU process and, therefore, can affect system 
performance. For more information about the impact on system performance when using debug 
commands, refer to Using Debug Commands on Cisco IOS XR Software. 

A message may consistently appear on the console log. You must have specific hardware knowledge 
of the Cisco CRS-1 to interpret the debug information.

The following example shows sample output with the debug oird command:

RP/0/RP0/CPU0:router# debug oird all

Specifies the debug information for both the event and message keywords.

Specifies the debug information for OIRD event interrupts.

Specifies the debug information for OIR event triggered messages.

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

No modification.

Release 3.3.0

No modification.

system

read