Denon DN-S1200 Manual De Usuario



1. PS/2Keyboard

q

  Qwerty, Qwertz, Azerty type keyboard layouts are supported.

w

  The DN-S1200 can be operated from the keyboard. 

  For the usable keys and their functions, refer to the table below.

1

 knob (Scroll Up)

2

 knob (Scroll Down)

3

ENTER

Pushing 

 knob

4

ESC

 button

5

Shift+TAB

Connects  by  D-Link  and  switches  to 
functions operable from the keyboard.

6

INSERT

 button

7

Windows

 button

8

ALT

 button

9

F1

 button

10

F2

 button

11

F3

 button (Press and hold in)

12

F12

Switches the number of steps for
file searching.

Keys  (characters)  other  than  the  ones  on  the  above  table  are  used 
when  inputting  characters.    For  a  list  of  the  characters  that  can  be 
used, see the section called “About Character Input” (vpage 23).

2. 

USB mass storage device

q

  Operation of the USB device may be unstable when using the bus 

power only.

w

  If the USB device is not recognized, it might be recognized if it is 

disconnected then reconnected.

e

  Devices on which power is supplied from the device to the host 

equipment side in a way not conforming to USB standards could 
damage the host equipment. Do not use such devices.

r

  Do  not  disconnect  a  USB  device  when  it  is  selected  to  be 

operated by the DN-S1200 or when the database is being created. 
Disconnecting while the device is being accessed could damage 
files, etc.

t

  For  large  capacity  USB  devices  and  USB  devices  that  are  not 

specifically  designed  for  data  storage  (MP3  players,  etc.),  it  may 
take some time for the device to be recognized after it is connected 
to the DN-S1200.

y

  Use a USB memory device meeting or in conformity with the USB 

Compliance Test.

u

  The DN-S1200 is not compatible with USB hubs.

i

  The DN-S1200 is compatible with FAT16 and FAT32.

3. iPod®

q

  Only  Windows  format  iPods®  can  be  used.Macintosh  format 

iPods® cannot be used.

w

  MP3/WAV files transferred from iTunes® to an iPod® are read-only 

files,   so the MEMO function cannot be used with them.

e

  In  iTunes®,  place  a  check  mark  at “Manually  manage  music”  in 

“Summary”–“Options”.

r

  MP3/WAV files transferred from iTunes® to an iPod® are managed 

with  iPod’s®  specific  file  names,  so  it  is  not  possible  to  search 
using the original file names.

  We recommend searching using ID3 tags (artist,album, title, genre, 

year, BPM, etc.).

b  

iPod®  and  iTunes®  are  trademarks  or  registered  trademarks  of 
Apple Computer, Inc.

4. Others

q

  With  the  DN-S1200,  the  software  can  be  updated  using  a  USB 

device, but note that some time may be required for the device to 
be recognized.

w

  Do not use cables other than those conforming to USB standards. 

   Using modified USB cables could damage the DN-S1200.
e

  If there is a large number of files stored in folders on the device,  

searching  may  take  some  time  and  operation  may  be  unstable. 
Keep the number of files per folder to under 1000.

The device being played can be switched.
CD is first selected when the power is turned on.
The operation procedure is described below.

The “SOURCE” selection screen is displayed.

b

 Operation is possible once the device is prepared.

When “CD” is selected:
The CD can be played.
When “USB” is selected:
The USB can be played.
When “PC” is selected:
The USB MIDI control mode is set.

When  multiple  DN-S1200s  are  connected  to  this  set,  change  the 
“PRESET”  –  “(24)  MIDI  CH  Set”  setting  to  a  different  number 
(vpage 27).

The USB Audio interface is compatible with one set of stereo outputs 
and a sampling frequency of 44.1 kHz.
The DN-S1200 supports low latency ASIO/OSX Core Audio.