3com WX1200 3CRWX120695A Manual De Usuario

110

HAPTER

5: VLAN C

OMMANDS

dynamic

— Displays dynamic entries. A dynamic entry is automatically

removed through aging or after a reboot, reset, or power cycle.

system

— Displays system entries. A system entry is added by MSS.

For example, the authentication protocols can add entries for wired
and wireless authentication users.

all

— Displays all entries in the database, or all the entries that match

a particular port or ports or a particular VLAN.

port port-list — Destination port(s) for which to display entries.

Defaults — None.

Access — All.

History —Introduced in MSS Version 3.0.

Usage — To display the entire forwarding database, enter the display fdb
command without options. To display only a portion of the database, use
optional parameters to specify the types of entries you want to display.

Examples — The following command displays all entries in the
forwarding database:

WX4400# display fdb all

* = Static Entry. + = Permanent Entry. # = System Entry.

VLAN TAG Dest MAC/Route Des [CoS] Destination Ports

[Protocol Type]

---- ---- ------------------ ----- -----------------------------------------

1 00:01:97:13:0b:1f 1 [ALL]

1 aa:bb:cc:dd:ee:ff * 3 [ALL]

1 00:0b:0e:02:76:f5 1 [ALL]

Total Matching FDB Entries Displayed = 3

The top line of the display identifies the characters to distinguish among
the entry types.

The following command displays all entries that begin with the MAC
address glob 00:

WX4400# display fdb 00:*