3com WX1200 3CRWX120695A Manual De Usuario

C

HAPTER

 7: IP S

ERVICES

 C

OMMANDS

„

—The switch can use the string to send notifications.

„

—An SNMP management application using the string 

can get and set object values on the switch.

„

— An SNMP management application using 

the string can get and set object values on the switch. The switch 
can use the string to send notifications.

„

auth-type {none | md5 | sha} {auth-pass-phrase string | 

auth-key hex-string}

 — Specifies the authentication type used to 

authenticate communications with the remote SNMP engine. You can 
specify one of the following:

„

—No authentication is used.

„

—Message-digest algorithm 5 is used.

„

—Secure Hashing Algorithm (SHA) is used.

If the authentication type is md5 or sha, you can specify a passphrase 
or a hexadecimal key. 

„

To specify a passphrase, use the auth-pass-phrase string option. 
The string can be from 8 to 32 alphanumeric characters long, with 
no spaces. 

„

To specify a key, use the auth-key hex-string option.

„

{encrypt-pass-phrase string | encrypt-key hex-string} 

— 

Specifies the encryption type used for SNMP traffic. You can specify 
one of the following:

„

—No encryption is used. This is the default.

„

—Data Encryption Standard (DES) encryption is used.

„

—Triple DES encryption is used.

„

—Advanced Encryption Standard (AES) encryption is used.

If the encryption type is des, 3des, or aes, you can specify a 
passphrase or a hexadecimal key. 

„

To specify a passphrase, use the encrypt-pass-phrase string 
option. The string can be from 8 to 32 alphanumeric characters 
long, with no spaces. 

„

To specify a key, use the encrypt-key hex-string option.