3com WX1200 3CRWX120695A Manual De Usuario

Access — Enabled.

History —Introduced in MSS Version 3.0.
Version 4.2 made the following changes:

„

Removed the following parameters that no longer apply:

„

11g-only

„

long-retry

„

short-retry

„

The wmm parameter name changed to qos-mode.

Usage — Use the command without any optional parameters to create 
new profile.

 

If the radio profile does not already exist, MSS creates a new 

radio profile. Use the enable or disable option to enable or disable all 
the radios using a profile. To assign the profile to one or more radios, use 
the set ap radio radio-profile command.

max-tx-lifetime

2000

Allows a frame that is scheduled for 
transmission to stay in the buffer for up to 
2000 ms (2 seconds).

preamble-length

short

Advertises support for short 802.11b 
preambles, accepts either short or long 
802.11b preambles, and generates unicast 
frames with the preamble length specified 
by the client.

Note: This parameter applies only to 
802.11b/g radios.

qos-mode

wmm

Classifies and marks traffic based on 
802.1p and DSCP, and optimizes 
forwarding prioritization of MAP radios for 
Wi-Fi Multimedia (WMM).

rts-threshold

2346

Transmits frames longer than 2346 bytes 
by means of the 
Request-to-Send/Clear-to-Send (RTS/CTS) 
method.

service-profile

No service 
profiles 
defined

You must configure a service profile. The 
service profile sets the SSID name and 
other parameters.

Table 72   Defaults for Radio Profile Parameters (continued)