3com WX1200 3CRWX120695A Manual De Usuario
668
C
HAPTER
20: F
ILE
M
ANAGEMENT
C
OMMANDS
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — The filename and file:filename URLs are equivalent. You can
use either URL to refer to a file in an WX switch’s nonvolatile memory. The
tftp://ip-addr/filename URL refers to a file on a TFTP server. If DNS is
configured on the WX switch, you can specify a TFTP server’s hostname as
an alternative to specifying the IP address.
use either URL to refer to a file in an WX switch’s nonvolatile memory. The
tftp://ip-addr/filename URL refers to a file on a TFTP server. If DNS is
configured on the WX switch, you can specify a TFTP server’s hostname as
an alternative to specifying the IP address.
The tmp:filename URL specifies a file in temporary storage. You can copy
a file out of temporary storage but you cannot copy a file into temporary
storage. Temporary storage is reserved for use by MSS.
a file out of temporary storage but you cannot copy a file into temporary
storage. Temporary storage is reserved for use by MSS.
If you are copying a system image file into nonvolatile storage, the
filename must be preceded by the boot partition name, which can be
boot0 or boot1. Enter the filename as boot0:/filename or
boot1:/filename. You must specify the boot partition that was not used
to load the currently running image.
filename must be preceded by the boot partition name, which can be
boot0 or boot1. Enter the filename as boot0:/filename or
boot1:/filename. You must specify the boot partition that was not used
to load the currently running image.
The maximum supported file size for TFTP is 32 MB.
Examples — The following command copies a file called floorwx from
nonvolatile storage to a TFTP server:
nonvolatile storage to a TFTP server:
WX4400# copy floorwx tftp://10.1.1.1/floorwx
success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]
The following command copies a file called closetwx from a TFTP server to
nonvolatile storage:
nonvolatile storage:
WX4400# copy tftp://10.1.1.1/closetwx closetwx
success: received 637 bytes in 0.253 seconds [ 2517
bytes/sec]
The following command copies system image WXA03001.Rel from a TFTP
server to boot partition 1 in nonvolatile storage:
server to boot partition 1 in nonvolatile storage:
WX4400# copy tftp://10.1.1.107/WXA03001.Rel
boot1:WXA03001.Rel
............................................................
................................................success:
received 9163214 bytes in 105.939 seconds [ 86495 bytes/sec]