3com WX1200 3CRWX120695A Manual De Usuario
set ntp update-interval
185
set ntp
update-interval
update-interval
Changes how often a WX sends queries to the NTP servers for updates.
Syntax —
set ntp update-interval
seconds
seconds
— Number of seconds between queries. You can specify
from 16 through 1,024 seconds.
Defaults — The default NTP update interval is 64 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command changes the NTP update interval
to 128 seconds:
to 128 seconds:
WX4400# set ntp update-interval 128
success: change accepted.
See Also
set snmp
community
community
Configures a community string for SNMPv1 or SNMPv2c.
For SNMPv3, use the set snmp usm command to configure an SNMPv3
user. SNMPv3 does not use community strings.
user. SNMPv3 does not use community strings.
Syntax —
set snmp community comm-string
access {read-only | read-notify | notify-only | read-write |
notify-read-write}
comm-string
— Name of the SNMP community. Specify between 1
and 32 alphanumeric characters, with no spaces.
read-only
— Allows an SNMP management application using the
string to get (read) object values on the switch but not to set (write)
them.
them.