3com WX1200 3CRWX120695A Manual De Usuario
set ap radio tx-power
393
radio-profile
name
— Radio profile name of up to 16 alphanumeric
characters, with no spaces.
mode enable
— Enables radios on the specified ports with the
parameter settings in the specified radio profile.
mode disable
— Disables radios on the specified ports.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
Usage — When you create a new profile, the radio parameters in the
profile are set to their factory default values.
profile are set to their factory default values.
To enable or disable all radios using a specific radio profile, use set
radio-profile.
radio-profile.
Examples — The following command enables radio 1 on MAP 5
assigned to radio profile rp1:
assigned to radio profile rp1:
WX1200# set ap 5radio 1 radio-profile rp1 mode enable
success: change accepted.
See Also
set ap radio
tx-power
tx-power
Sets the transmit power of a MAP radio.
Syntax —
set ap ap-number radio {1 | 2} tx-power power-level
ap
ap-number
— Index value that indentifies the MAP on the WX.
radio 1
— Radio 1 of the MAP.
radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)