Philips BDL463IV Manual De Usuario
User Manual BDL4631V/00
9
Terminal Panel
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a computer, VCR or DVD player.
AUDIO OUT
To output the audio signal from the AUDIO IN 1,2 and 3 jack.
EXTERNAL CONTROL (mini D-Sub 9 pin)
This is for serial connection when multiple BDL4631V monitors are connected. To achieve the remote control through RS232 command (refer to the
RS232 remote control user manual), connect the IN connector with the RS-232C OUT connector from the computer or a multi-connected BDL4631V
monitor and connect the OUT connector with the RS-232C IN connector of BDL4631V monitor.
RS232 remote control user manual), connect the IN connector with the RS-232C OUT connector from the computer or a multi-connected BDL4631V
monitor and connect the OUT connector with the RS-232C IN connector of BDL4631V monitor.
VIDEO IN/OUT
VIDEO IN connector (BNC and RCA): To input a composite video signal. Note that BNC and RCA are not available at the same time.
VIDEO OUT connector (BNC): To output the composite video signal from VIDEO IN connector.
S-VIDEO IN connector (MINI DIN 4 pin): To input the S-video (Y/C separate signal).
EXTERNAL SPEAKER TERMINAL
To output the audio signal to external speakers from AUDIO IN 1, 2, 3 jack or HDMI.
AC IN connector
To connect with the supplied power cord.
HDMI
1 IN
To input digital RGB signals from a digital equipment or computer.
* This connector does not support analog input. AUDIO is supported via HDMI.
HDMI
2 IN
To input digital RGB signals from a digital equipment or computer.
* This connector does not support analog input. AUDIO is supported via HDMI.
PC-A
IN (mini D-Sub 15 pin)
To input analog RGB signals from a computer or other RGB equipment.
RGB OUT (mini D-Sub 15 pin)
To output the signal from PC-A IN.
CVI IN [Y, Pb/Cb, Pr/Cr] (BNC)
To Connect an equipment such as a DVD player, HDTV device, or Laser disc player.