Furuno NAVpilot-700 Manual De Usuario

4.  HOW TO CUSTOMIZE YOUR NAVPILOT

Speed is normally entered automatically, from your navigator. If the navigator fails, 
manually enter speed.

1. Rotate the Course control knob to select [SPEED CALCULATION] from the [PA-

RAMETER SETUP] menu.

2. Push the Course control knob to show the options for [SPEED CALCULATION].

3. Rotate the Course control knob to select [AUTO] or [MANUAL] then push the 

knob. For [AUTO] go to step 4. For [MANUAL], do as follows:
1) Rotate 

the 

Course control knob to select the current value then push the 

knob.

2) Rotate 

the 

Course control knob to set a value (0.1 - 99.0).

4. Push the Course control knob to finish.

For Fantum Feedback

TM

, the driving power of steering can be adjusted by the rudder 

drive level. The higher the setting is, the greater the rudder is turned.

1. Press the MENU key.
2. Rotate the Course control knob to select [RUDDER DRIVE LEVEL] then push 

the knob. 

3. Rotate the Course control knob to set a value (1 - 20) then push the knob.
4. Press the MENU key to finish.

MANUAL