Furuno 711c Manual De Usuario
6. INSTALLATION AND WIRING
6-8
4. Disconnect the fan connector.
5. Put the cable cores of the cable assy. (type: BD-07AFFM-LR-100/150) into their
correct connector block, then connect to the TB8 port.
6. Fix the cable assy. to the cable clamp with a cable tie (supplied with processor
unit).
7. Connect the fan connector.
8. Reattach the cable clamp/fan assy. and outside cover.
8. Reattach the cable clamp/fan assy. and outside cover.
Pin no.
Signal
Color
Pin no.
Signal
Color
1
POWER_SW1
White
8
POWER_SW2
White
2
GND
Blue
9
GND
Blue
3
CAN1_H
Yellow
10
CAN2_H
Yellow
4
CAN1_L
Green
11
CAN2_L
Green
5
12V_P
Red
12
12V_P
Red
6
GND
Black
13
GND
Black
7
SHIELD
Drain
14
SHIELD
Drain
Fan connector:
Disconnect this connector
㪍㩷㫄㫄
㪈 㪉 㪊 㪋 㪌㪌
Cable entrance of the processor unit
TB8 port
Pin arrangement
Connection line 1
Pin no.: 1 to 7
㪍㪍 㪎㪎
TB8 port
Connection line 2
Pin no.: 8 to 14
Connector block
Push
Cores
How to put wire into connector block
1. Make length of cores 6 mm.
2. Twist cores.
3. Push spring-loaded catch with slotted-head
screwdriver.
4. Insert core into hole.
5. Release screwdriver.
6. Pull wire to confirm it is securely inserted.
1. Make length of cores 6 mm.
2. Twist cores.
3. Push spring-loaded catch with slotted-head
screwdriver.
4. Insert core into hole.
5. Release screwdriver.
6. Pull wire to confirm it is securely inserted.