Furuno 711c Manual De Usuario

7.  INITIAL SETTINGS

The [CAN Bus Setup] menu sets up the equipment connected to the CAN bus port. To 
open the [CAN Bus Setup] menu, select [CAN Bus Setup] from the [Installation Menu] 
window.

1. The cursor is selecting [Device List]; 

push the Course control knob.
The [Device List] display shows the 
name of the CAN bus equipment con-
nected to the CAN bus port. In the example illustration, the FURUNO heading 
sensor PG-700 is connected. The series of alphanumerics which follow the model 
name are the CAN bus unique number.

2. To change the device name, do the following. If you do not need to change the 

name, go to step 3.
1) Push 

the 

Course control knob.

2) Rotate 

the 

Course control knob to select character then push the knob.

3)  The cursor moves to the next character. Repeat step 2 to change the charac-

ter. You can select the input location with the 

 and 

 keys. The name 

can have a maximum of 14 characters.

3. Press the 

 key to return to the [CAN Bus Setup] menu.

4. Rotate the Course control knob to select [Incoming CAN Bus data].

This display shows all the NMEA 2000 sentences that the NAVpilot is capable of 
receiving. The Parameter Group Number (PGN) the NAVpilot is currently receiv-
ing are highlighted.

Device List

Incoming CAN Bus data

Select Output PGN List

Refresh: No

CAN Bus Setup

                  Device List

PG-700:     0019E4

126992

127488

129026

129285

130313

126464

127258

129025

129284

130312

126208

127251

128267

129283

130311

059904

126996

127489

129029

130306

130314

060928

127250

128259

129033

130310

130577

Incoming CAN Bus data