Furuno 711c Manual De Usuario

7.  INITIAL SETTINGS

3. For [Full-Auto], set the deviation level as follows:

1) Rotate 

the 

Course control knob to select the current setting for 

[Deviation Level] then push the knob.

2) Rotate 

the 

Course control knob to select [Auto] or [Level]. 

For [LEVEL], you may set a value between 1 and 9. A lower number keeps 
the course more precisely but the rudder may be turned more often. With a 
higher number, the rudder is fixed, but the course may not be kept as precise-
ly.

When [Manual-Calm], [Manual-Moderate] or [Manual-Rough] is selected as the sea 
state, set [Manual parameter] as below.

You can set three parameters for the manual function: [Weather], [Rudder Gain] and 
[Counter Rud.].

1. Rotate the Course control knob to select [Manual Parameter] from the [Parame-

ter Setup] menu then push the knob.
The display as shown below appears.

2. Rotate the Course control knob to select the current setting value of [Weather]-

[Calm] then push the knob.

3. Rotate the Course control knob to set a value (setting range: 0° to 10°) to push 

the knob.

4. Set [Weather-Moderate], [Weather-Rough] similarly. 
5. Set [Rudder Gain] and [Counter Rud.] similarly.

Setting range: 1-20 for [Rudder Gain], and 0-20 for [Counter Rud.]

Level

Manual Parameter

Weather

Rudder Gain

Counter Rud.

Calm Moderate Rough

1

°

2

3

3°

1°

5

2

10

4