Furuno 711c Manual De Usuario

4.  USER MENU

[Password 
Function]

Activates or deactivates password requirement. Select [ON] to require a pass-
word to access menus. If the password is entered correctly, the menu be-
comes operative and the option setting for this item changes to [OFF].

[Save User Setting]

Save current settings as user default settings. Select [Yes] or [No].

[Load User Setting]

Load user default settings. The equipment is automatically restarted to restore 
saved user settings. Select [Yes] or [No].

[Save Display Set-
ting]

Save all display-related settings. Select [Yes] or [No].

[Load Display Set-
ting]

Load currently saved display-related settings. Select [Yes] or [No].

[Alarm Log]

You can see which alarm(s) has(have) been violated. 

A maximum of 20 

alarms are listed (see section 3.13.). When the capacity is exceeded, the old-
est alarm is deleted to make a room for the latest.

[Sim/Demo]

Activate or deactivate the demonstration mode. DO NOT use this function on 
board your boat; it is intended for use by service technicians. 
[OFF]: Deactivate the demonstration mode.
[Demo Slide Show]: Shows the slide show to demonstrate the NAVpilot.
[Simulator]: The NAVpilot can be operative by the preset simulation data.
[Sim W/Drive]: The NAVpilot can be operative same as simulation mode, but 
the data for rudder information is required to input.

[Diagnostic]

Perform various diagnostics on the NAVpilot system. See section 5.3. Avail-
able in the STBY mode only.

[Display Data Select 
Menu]

Set and select the data to show in each steering mode. See section 1.5.3 for 
the procedure.

[System Data]

Show system data. See section 5.4.