Furuno GP-1850DF Manual De Usuario
iiiiiiiiiiiii
i
Ground the equipment to
prevent electrical shock
and mutual interference.
prevent electrical shock
and mutual interference.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage. The
voltage rating appears on the label at the
rear of the display unit.
can cause fire or equipment damage. The
voltage rating appears on the label at the
rear of the display unit.
Use the correct fuse.
Use of a wrong fuse can cause fire or
equipment damage.
equipment damage.
Keep the following compass safe
distance.
distance.
Standard Steering
Display Unit 0.98 m 0.74 m
CAUTION
CAUTION
When handling the transducer cable,
keep in mind the following points.
keep in mind the following points.
•
Keep the cable away from oil and
fuel.
fuel.
•
Keep the cable away from the
place where it may be damaged
during the installation.
place where it may be damaged
during the installation.
•
Do not paint the cable.
The sheath of the transducer cable is
made of chlorophrene rubber (or vinyl
chloride). Therefore, do not paint the
sheath with organic liquid (such as
toluene) since it may harm the sheath.
made of chlorophrene rubber (or vinyl
chloride). Therefore, do not paint the
sheath with organic liquid (such as
toluene) since it may harm the sheath.
WARNING
WARNING
Do not work inside the
equipment unless totally
familiar with electrical
circuits.
equipment unless totally
familiar with electrical
circuits.
Hazardous voltage which can
shock, burn or cause serious
injury exists inside the equip-
ment.
shock, burn or cause serious
injury exists inside the equip-
ment.
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or
serious injury can result if the
power is left on or is applied
while the equipment is being
installed.
serious injury can result if the
power is left on or is applied
while the equipment is being
installed.
SAFETY INSTRUCTIONS
Safety Instructions for the Installer