Schneider Electric HRB1684301-01 Manual De Usuario

44

HRB1684301-01

Chapter 3—Front panel display and meter setup

PowerLogic™ PM5500 series user manual

1. Navigate to Maint > Setup.

2. Enter the setup password (default is “0”), then press OK.

3. Navigate to HMI > Pass.

4. Move the cursor to point to the parameter you want to modify, then press Edit.

5. Modify the parameter as required, then press OK.

6. Move the cursor to point to the next parameter you want to modify, press Edit, 

make your changes, then press OK.

7. Press   to exit. Press Yes to save your changes.

Visit www.schneider-electric.com for support and assistance with lost passwords or 
other technical problems with the meter.

Make sure you include your meter’s model, serial number and firmware version in your 
email or have it readily available if calling Technical Support.

The Clock setup screens allow you to set the meter’s date and time.

NOTE: You must always set or sync the meter time to UTC (GMT, Greenwich Mean 
Time), not local time. Use the GMT Offset (h) setup parameter to display the correct 
local time on the meter.

Setup

0000 - 9999

Sets the password for accessing the meter setup 
screens (Maint > Setup).

Energy Resets

0000 - 9999

Sets the password for resetting the meter’s 
accumulated energy values.

Demand Resets

0000 - 9999

Sets the password for resetting the meter’s 
recorded peak demand values.

Min/Max Resets

0000 - 9999

Sets the password for resetting the meter’s 
recorded minimum and maximum values.

Maint

Reset

Setup

Comm

Alarm

I/O

Meter

Displ

Region

Pass

HMI