Schneider Electric HRB1684301-01 Manual De Usuario

PowerLogic™ PM5500 series user manual 

Chapter 8—Input / Output

HRB1684301-01

73

If you want to configure for kWh pulsing, you must adjust the pulse weight calculation 
and unit code as follows:

•

Pulse Weight = pulses/kWh = 1/0.125 = 8

•

Unit Code = kWh

Input metering can be configured using the front panel or software.

NOTE: It is recommended you use ION Setup to configure input metering, as setup 
parameters that require text entry can only be modified using ION Setup.

You can use ION Setup to configure the input metering channels.

1. Start ION Setup.

2. Connect to your meter

3. Navigate to I/O configuration > Input metering.

4. Select an input metering channel to configure and click Edit. The Channel Setup 

screen is displayed

5. Enter a descriptive name for the metering channel’s Label.

6. Configure the other input metering parameters as required.

7. Click Send to save your changes.

You can use the front panel to configure the input metering channels.

Label

—

Use this field to change the default label and assign a 
descriptive name to this input metering channel.

Pulse Weight

0 to 99.99999

Use this field to specify the quantity or value each pulse 
represents.

Units

No units, Wh, kWh, MWh, 
VARh, kVARh, MVARh, 
VAh, kVAh, MVAh, gal, BTU, 
L, m

3

, MCF, lbs, kg, klbs, 

Therm

Select the unit of measurement associated with the 
monitored value.

Rate

For time-based values (such as kWh), this provides the 
associated demand units (kW) for demand calculations. 
For other values (such as kg), this can be configured to 
provide rate information (kg/h).

Mode

Pulse or Transition

Set Mode to Pulse to count only complete pulses. Set 
Mode to Transition to count each ON-to-OFF or OFF-to-
ON status change.

Available Inputs / 
Assigned Inputs

Digital Input DI1 to DI4

Select the digital input from the Available Inputs box and 
use the right arrow button to assign the input metering 
channel to that digital input.