Schneider Electric PM5300 Manual De Usuario

PowerLogic™ PM5300 series user guide 

Chapter 3—Hardware Reference

© 2014 Schneider Electric All Rights Reserved

Carefully read and follow the safety precautions before working with the meter.

Installation, wiring, testing and service must be performed in accordance with all local and 
national electrical codes.

1. Turn off all power supplying this device before working on it.

2. Always use a properly rated voltage sensing device to confirm that all power is off.

Isolation

2.5 kVrms, double insulated

Display type

Monochrome Graphics LCD

Resolution

128 x 128

Backlight

White LED

Viewable area (W x H)

67 x 62.5 mm

Keypad

4-button

Indicator Heartbeat / Comm activity

Green LED

Energy pulse output / Active alarm indication (configurable)

Optical, amber LED

Wavelength

590 to 635 nm

Maximum pulse rate

2.5 kHz

1 

For firmware version 1.1.1 and higher

2

 For 1A nominal CT when I > 0.15A

3 

Tests are conducted as per IEC 61557-12 (IEC 61326-1), 62052-11 and EN50470

• Apply appropriate personal protective equipment (PPE) and follow safe electrical 

work practices. See NFPA 70E in the USA or applicable local standards.

• Turn off all power supplying this device before working on it.
• Always use a properly rated voltage sensing device to confirm that all power is off.
• Do not exceed the device’s ratings for maximum limits.
• Always use grounded external CTs for current inputs.