Furuno FAR-2107 Manual De Usuario

When there are many trails on the screen, especially when using long trails, it is diffi-
cult to distinguish past tracks from current tracks since they are the same color. With 
the trail color shift feature, tracks are painted in a different color from the point when 
color shift is activated. For example, the current track color is 1: FUCHSIA. Then, at 
the moment the trail color shift is made active, trails from that point will be painted in 
2: MAROON.

Note: At the moment the trail color shift is activated, the trail colors in effect after the 
time set in the TRAIL MODE box are erased. For example, the trail length is 12 
HOURS and the time set in the TRAIL MODE box is 05:00. Then, using the illustration 
above as an example, 6: LIME will not be shown.

2 TRAIL GRAD in the TRAIL menu must be set to SINGLE and 8 TRAIL LENGTH to 
other than NORMAL in order to activate the trail color shift feature.

1. Right-click the TRAIL MODE box.

2. Select 0 [TRAIL COLOR] then push the left button.

3. Select 2 COLOR SHIFT then push the left button.

4. Select YES then push the left button.

5. Push the right button twice to close the menu.

Target

Echo trail

1:FUCHSIA 2:MAROON 3:RED

4:PPL

5:YEL

2:MAROON

3:RED

4:PPL

5:YEL   6:LIME

Trail color before shift

Trail color after shift

Fuchsia color 
displayed up to 
this point

Target

 [TRAIL

 

COLOR]

 

 
1 BACK
2 COLOR SHIFT
  NO/YES
3 TRAIL COLOR
   1: FUCHSIA
   2: MAROON
   3: RED
   4: PURPLE
   5: YELLOW
   6: LIME
   7: GREEN
   8: OLIVE
   9: TEAL
  10: CYAN
  11: BLUE
 12: 

NAVY