GE PB750 Manual De Usuario

27

Do not clean the bake element or the broil
element. Any soil will burn off when the elements
are heated.

To clean the oven floor, gently lift the
bake element. Clean with warm soapy
water.

All oven racks may be cleaned by hand
with an abrasive cleaner or steel wool.
After cleaning, rinse the racks with clean
water and dry with a clean cloth. Gray
porcelain-coated oven racks may remain
in the oven during the self-cleaning 
cycle without being damaged. The shiny,
silver-colored oven racks may remain in
the oven during the self-cleaning cycle, 
but they will lose their luster and become
hard to slide.

It will be necessary to grease all oven 
rack side edges with a light coating of
vegetable oil after cleaning them by hand
or in the oven. This will help maintain
the ease of sliding the racks in and out 
of the oven.

CAUTION: Before replacing your oven light
bulb, disconnect the electrical power to 
the range at the main fuse or circuit breaker
panel.

Be sure to let the light cover and bulb
cool completely.

Hold a hand under the cover so it
doesn’t fall when released. With
fingers of the same hand, firmly
push back the wire cover holder. 
Lift off the cover.

Do not remove any screws to remove the cover.

Replace bulb with a 40-watt
appliance bulb.

Place it into groove of the light
receptacle. Pull wire forward to the
center of the cover until it snaps 
into place.

Connect electrical power to the
range.

Wire cover holder.