Maytag 12828186A Manual De Usuario

Descargar
Página de 36
8
Adjust the Doors
Depending on your model, your refrigerator may have four 
adjustable rollers (Style 1) or a leveling screw (Style 2) located at 
the base of the refrigerator. If your refrigerator seems unsteady or 
you want the door to close more easily, use the instructions 
below. 
1. Remove the base grille. Grasp the grille firmly and pull it 
toward you.
2. Raise or lower the cabinet. 
Style 1 - Front and rear leveling
Using a 
³⁄₈" hex driver, turn the roller adjustment screw(s) on 
each side to raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the 
refrigerator takes some weight off the adjustment screws and 
rollers. This makes it easier to turn the screws. It may take 
several turns of the roller adjustment screw to adjust the tilt of 
the refrigerator.
To raise, turn the roller adjustment screw to the right.
To lower, turn the roller adjustment screw to the left.
Turn the brake foot clockwise until it is firmly against the floor 
to keep the refrigerator from rolling forward when the freezer 
drawer is pulled open.
Style 2 - Leveling screw
Using a 
¹⁄₄" hex driver, turn the leveling screw on each side to 
raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the 
refrigerator takes some weight off the leveling screws. This 
makes it easier to turn the screws. It may take several turns of 
the leveling screw to adjust the tilt of the refrigerator.
To raise, turn the leveling screw clockwise.
To lower, turn the leveling screw counterclockwise. 
NOTE: Your refrigerator may have a rear roller adjustment 
screw on each side. To raise or lower the rear of the 
refrigerator, use a 
³⁄₈" hex driver to turn the screws. 
3. Open the door again to make sure that it closes as easily as 
you like. If not, tilt the refrigerator slightly more to the rear by 
turning both leveling screws clockwise. It may take several 
more turns, and you should turn both screws the same 
amount.
4. Replace the base grille.
REFRIGERATOR USE
Opening and Closing Doors
There are two refrigerator compartment doors. The doors can be 
opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
When the left side door is opened, the hinged seal 
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically 
forms a seal between the two doors. 
A. Rear roller adjustment screw
B. Front roller adjustment screw
C. Brake foot
B
A
C
A. Rear roller adjustment screw
B. Leveling screw
A. Hinged seal
B
A
A