Turbo Air SAK-70 Manual De Usuario
11
Turbo air Speeds UP the Pace of Innovation
metering device,m driers, motoir starting equipment, fan assembly or and other
electrical components, etcetera.
404A / 134A Compressor warranty
The four-year compressor warranty detailed above will be void if the following
Procedure is not carefully adhered to:
1. This system contains R404A or R134A refrigerant and polyol ester lubricant. The
polyol ester lubricant has rapid moisture absorbing qualities.
2. Drier replacement is very important and must be changed when a system is opened
for servicing. A 620 dopper drier or better is highly recommended.
3. Micron level vacuums must be achieved to insure low moisture levels in the system.
500 microns or lower must be obtained.
4. When compressor is grounded, suction filter drier and 620 drier or better must be
replaced.
5. Compressor must be obtained through Turbo Air, unless otherwise specified in
writing, through Turbo Air’
s warranty department.
What is not covered by this warranty
Turbo Air’s sole obligation under this warranty is limited to either repair or
replacement of parts, subject to the additional limitations below. This warranty neither
assumes nor authorizes any person to assume obligations other than those expressly
covered by this warranty.
NO CONSEQUENTIAL DAMAGES. TURBO AIR IS NOT RESPONSIBLE FOR
ECONOMIC LOSS;PROFIT LOSS;OR SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, INCLUDING WITHOUT LIMITATION, LOSSES, OR DAMAGES ARISING
FROM FOOD OR PRODUCT SPOILAGE REGARDLESS OF WHETHER OR NOT THEY