Hitachi r-sf42bms Manual De Usuario

● It may take more than 4 hours through 24 hours to cool well the inside of the refrigerator, depending on 

conditions such as the ambient temperature or the storage state of foods.

● Perform 

“CLEANING” (Ice Maker Cleaning) when using the automatic ice making function fi rst. 

Pg.50

● A series of ice making operation will start automatically after the inside of the refrigerator is cooled well.

(When using for the fi rst time, it may take 24 hours and more to make ice.)

● Make sure to empty food and ice from the refrigerator. Always 

drain water from the water supply container and ice tray.

● Secure the door with tape.
● Lay a protective sheet or cloth to protect the fl oor from damage 

and catch remaining water spilled from the refrigerator.

● With a large piece of old cloth underneath, tilt the refrigerator 

backward to drain water.

● More than two persons should grip the handles for carrying 

and move the refrigerator.

● See 

“Preparation before use” for installing the refrigerator in a 

new location. 

Pg.36

● Do not remove the sticker from the back of the refrigerator. This 

sticker is necessary to secure the performance and safety.

● Do not remove the plastic parts and label from the bottom part of the 

side of the refrigerator.

※ If you wish to install the refrigerator in a hot spring area exposed to sulfi de gas, you may need to apply anti-rust treatment 

to the piping. Contact your dealer in advance. Failure caused by gas damage will not be covered under guarantee.

Stickers

Left/Right

Plastic parts

Label

Such as old cloth

● It is not a problem to plug in the 

power cord soon after installing the 
refrigerator.

● Use a wall outlet exclusively 

when connecting the power cord. 
(Alternating current 220

∼ 230V, 

rated 15A or more)

● It is recommended to fi x the refrigerator to a sturdy wall or pillar using 

two "safety belt against overturning for refrigerators".

● Option: "Safety belt against overturning for refrigerators" (Parts No. 

R-826CV 300: belt x 1) Contact your dealer for details.

Screw x 4
(attached to belt)

Belt