Haier RRCS25 Manual De Usuario

Descargar
Página de 96
temporary  Stored  Food  or  Frequently  Used  Foods 
Should be Kept in the Fresh Food Compartment.
Although  the  average  fresh  food  temperatures  are  between  34  to  46  °F  
(1 to 8 °C) food shelf life should be checked periodically.
Adjusting Cantilever Shelves
You have the option of adjusting the glass shelves to different locations to 
accommodate different stored food heights. Raise the shelf up (as shown) 
to  disengage  the  rear  hooks  in  the  vertical  ladders  and  pull  up  and  out. 
Reverse the order when re-positioning by tilting down into a new slot ladder 
location and hooking into place.
Using the Crispers
The  refrigerator  comes  with  2  crispers  which  you  can  adjust  using  the 
humidity control knobs.
Adjustment and Cleaning of the Door bottle bin
Lift the door bottle bin as shown in step 1. Take the two sides and draw it 
out according to step 2.
After cleaning, reinstall the bottle bin in the reverse order. The bottle bin 
position can be adjusted according to food height.
Dismounting the Crisper Cover
Raise the back part of the shelf as shown in step 1 and draw it out according 
to step 2.
NOTE
Make sure the shelf is level on both sides of the ladder 
slot locations to prevent food from dropping or leaking 
out new slot ladder location and hooking into place.
NOTE
When you adjust the bins, do not place gallon bins or dairy bin in the lower door location. This 
will prevent interference with the crispers.
About the Fresh Food Compartment
For high humidity, turn up the knob. This suits storing cucumbers, grapes, 
and lettuce.
For  low  humidity,  turn  down  the  knob.  This  suits  meats,  cheeses, 
strawberries, tomatoes, and fruits.
When removing crispers, make sure to remove the top cover after pulling 
out the crispers.
Adjusting and cleaning the door bins: Lift the door bin as shown in step 1. 
Take both sides and pull out as shown in step 2. After cleaning, reinstall 
the bin in reverse order, and adjust the height as desired.
Removing the crisper cover. Refer to the picture and note it is done similar 
to the cantilever shelves.
Raise and 
take out
Upper  
slant
Insert  
top hook
Dismounting
Installation
15