Samsung RF4287HA Manual De Usuario

 

setting up

Be careful not to drop and scratch the doors while 
removing the doors.

1.  With the door opened, remove the cap top table ( 1 ) with 

a flat-blade screwdriver(-), and close the door. Remove the 
3 screws holding down the top table ( 

2 ) and turn it with 

several wires connected.

2.  Disconnect one connector ( 3 ) on the 

right side door and one connector ( 

4 ) 

on the left side door. Remove the water 
line ( 

5 ) while pressing the dark gray 

color part ( 

6 ) of the water line coupler.

If a red clip is on the coupler, it must 
be removed before removing the 
tube.

3.  Remove the 3 hex head bolts ( 7 ) attached to the upper left 

and right door hinges with a socket wrench(10mm). Remove 
the ground screw ( 

8 ) attached to the upper left and right door 

hinges with a philips screwdriver(+). Remove the upper left and 
right door hinges ( 

9 ).

4.  Lift the door straight up to remove.

5.  Remove the screw( 10 ) attached to the lower left and right 

door hinges with a philips screwdriver(+). Remove the 2 hex 
head bolts( 

11 ) attached to the lower left and right door 

hinges with an allen wrench(3/16”). Remove the lower left 
and right door hinges ( 

12 ).

wARning

1

2

cAution

4

5

6

3

Socket wrench

7

8

9

Allen wrench

12

10

11

AW3.indd   10

2010.3.4   2:32:44 PM