AEG HL 7275 Manual De Usuario

If the hood is used in its recirculation mode, it will operate simply

and safely in the above conditions without the need for any of the

aforementioned measures.

When the hood is used in its extraction mode, the following rules

must be followed to obtain optimal operation:

- short and straight outlet hose

- keep bends in outlet hose to a minimum

- never install the hoses with an acute angle, they must always

follow a gentle curve.

- keep the hose as large as possible (preferably the same diam-

eter as the outlet hole).

- the length should be no more than:

3 metres with one 90° bend

2 metres with two 90° bends

Bends of more than 90° will reduce the efficiency of the hood and

reduce the airflow.

Failure to observe these basic instructions will drastically reduce the

performance and increase the noise levels of the extractor hood.