GE IM-6 Manual De Usuario

•Unhook the ice tray holder side and bottom from 

the retaining hooks. Lower the holder until the side 
is clear of the freezer shelf and remove it from the
freezer. You will not need this part.

Retaining hooks

•As you lift the tab on the left side in the holder with 

the blade of a screwdriver, pull the holder forward 
and out. You will not need this part.

Do not
lift here

Lift this
tab out

•When following Instructions G, it is not necessary 

to remove the ice tray shelf or, on some models, 
the wire shelf next to it.

•Tilt the ice tray shelf and remove it. You will not 

need this part.

•Remove the 2 screws and save them for installation 

of the icemaker.

•Lift the ice tray holder off the plastic hook. You will 

not need this part.

Screws

Plastic hook

•Remove the screw with a 1/4

″ nutdriver.

•Pull the ice tray shelf away from the wall. Remove 

the shelf. You will not need this part.

•Replace the screw.

Screw