Hoshizaki KML-200MAE Guía Del Usuario

44

1) Turn off the power supply.

2) Remove the Front Panel.

3)  Remove the three screws and the Float Switch Assembly.

4) Remove the wiring connectors from the Pump Motor leads.

5) Remove the four screws and the Pump Motor.

5) Install the new Pump, and replace the removed parts in the reverse order of which
      they were removed.

6) Turn on the power supply, and check for leaks.

7) Replace the Front Panel in its correct position.

1) Turn off the power supply.

2) Close the Water Supply Line Shut-off Valve.

3) Remove the Front Panel.

4) Remove the Valve Outlet Tubing by releasing the Clamp.

5) Remove the Bracket from the unit.

6) Remove the Fitting Nut and Water Valve.

7) Disconnect the Terminals from the Water Valve.

8) Install the new Water Valve, and replace the removed parts in the reverse order of
    which they were removed.

9) Open the Water Supply Line Shut-off Valve.

10) Turn on the power supply.

11) Check for leaks.

12) Replace the Front Panel in its correct position.