Panasonic NN-SD978 Manual De Usuario

The oven causes

Some radio and TV interference might occur when you cook 

interference with

with the microwave oven. This interference is similar to the 

my TV.

interference caused by small appliances such as mixers,
vacuums, blow dryers, etc. It does not indicate a problem with
your oven.

Steam accumulates

During cooking, steam and warm air are given off from the 

on the oven door and

food. Most of the steam and warm air are removed from the 

warm air comes from 

oven by the air which circulates in the oven cavity. However, 

the oven vents.

some steam will condense on cooler surfaces such as the 
oven door. This is normal. After use, the oven should be 
wiped dry (see page 25).

The oven is not plugged in

Remove plug from outlet, wait

securely.

10 seconds and re-insert.

Main circuit breaker or main  Reset main circuit breaker or 
fuse is tripped or blown.

replace main fuse.

There is a problem with the Plug another appliance into the
outlet.

outlet to check if it is working.

The door is not closed 

Close the oven door securely.

completely.
Start Button was not  

Press Start Button.

pressed after programming.
Another program is already Press Stop/Reset Button to 
entered into the oven.

cancelthe previous program and 
enter new program.

The program is not correct. Program again according to the

Operating Instructions.

Stop/Reset Button has 

Program oven again.

been pressed accidentally.

The Glass Tray is not 

Take out Glass Tray and Roller 

positioned properly on the

Ring. Wipe with a damp cloth and 

Roller Ring or there is food

reset Roller Ring and Glass Tray

under the Roller Ring.

properly.

The Roller Ring and oven 

Clean these parts according to 

bottom are dirty.

Care and Cleaning of your 
Microwave Oven (see page 25).

The CHILD LOCK was 

Deactivate LOCK by pressing 

activated. 

Stop/Reset Button 3 times.

Oven will not turn on.

Oven will not start
cooking.

The Glass Tray
wobbles.

When the oven is
operating, there is
noise coming from
the glass tray.

The word “LOCK”
appears in the
Display Window.

The oven unit power supply
source failed.

Please contact an authorised
Service Center (see page 27).

The oven stops cook-
ing and "H97" or
"H98" appears in the
display window.

IP1810_38U80AP_12_081124  2008.11.24  14:49  Page 28