Hotpoint RVM1625SJ Prospecto

Descargar
Página de 2
®
RVM1625SJ – Hotpoint Counter Saver Plus
 Microwave Oven
Specification Created 1/04
440017
R
Listed by 
Underwriters 
Laboratories
Dimensions (in inches)
21-3/4"
Door open
16-13/32
66" MIN.
Mounting
height
from
floor
30"
MIN.
width 
required
12"
MIN.
Exhaust outlet
connects to
3-1/4" X 10" duct
15-1/4 
16
29-7/8
Important Information: When installing the Counter Saver Plus 
microwave oven over a range, allow minimum of 2" from bottom of 
Counter Saver Plus microwave oven to top of range backguard to allow for 
removal of light covers.
Installation Information: This information is not intended to be used for 
installing unit described. Before installing, consult installation instructions 
packed with product/kit for current dimensional data.
When replacing a 36" range 
hood, this kit fills in the  
additional width to provide a  
custom, built-in appearance. For 
installation between cabinets only; 
not for end-of-cabinet installation. 
Each kit contains two, 3"-wide 
filler panels. 
JX81A–
Recirculating 
Charcoal Filter Kit 
To be used when the 
Counter Saver Plus 
microwave oven  
cannot be vented to 
the outside.
Optional Accessories (Available at additional cost)
JX48BL – Black Filler  
Panel Kit 
Ventilation Options: The Counter Saver Plus microwave oven is designed for adaptation for the  
following three types of ventilation:
Outside Exhaust (Vertical)
Outside Exhaust (Horizontal)
Recirculating (Non-vented ductless–see Filter Kit Drawing)
Note: Before installing, consult installation instructions for current dimensional data on these  
three types of ventilation.