Multitech MTCBA-Xx-EN2 Manual De Usuario
Chapter 3 – Using the Web Management Software
58
MultiModem rCell User Guide
2.
To save the changes, click Submit.
3.
On the
PPP > Wakeup-on-Call
screen, set up the following parameters:
Wakeup-on-Call Configuration
●
Select Enable for Wakeup-on-Call.
●
Set the Time Delay. You can use the 10 second default.
●
Enter the Init Strings:
●
To set Wakeup Init String 1 type AT+CLIP=1.
●
To save settings, click Submit.
Caller ID Configuration
●
To add a caller’s ID, to the Caller ID list, type that id.
●
Click Add.
●
To save each Caller ID as it is entered to the Caller ID list, click Add.
●
To ensure your changes go into effect, click Save and Restart. The device saves all the settings and
reboots the computer.
reboots the computer.
PPP, Power-On Configuration Parameters
The Power-On Configuration feature allows you to set an initialization string that is sent to the router upon boot up.
Power-On Init String:
You can enter a string of 0 to 40 characters that is sent to the router upon boot up. All
commands initializes before you proceed with regular PPP related activity.
Note:
When no initialization string is configured, regular functions of the router is retained.
To save this setting click SUBMIT.
To ensure your changes go into effect, click Save and Restart.