SMART Technologies 9.5 Manual De Usuario

26

 

You can add the quiet switch /qn to the default command line installation above to install the 

service pack silently.

1. Click Start > Run and type CMD.

A DOS window opens.

2. Type the following command line:

"Path to the .msp\Board95ServicePackSPx.msp" /qn 

3. Press Enter.

You can also download the Board95ServicePackSPx.exe (where x is the service pack number) 

installation program from the SMART website. You can run the program from the website, or you 

can download the Board95ServicePackSPx.exe file to your computer or to a network drive.

You can use the following command to perform a default service pack installation:

1. Click Start > Run and type CMD.

A DOS window opens.

2. Type the following command line (including quotation marks):

"Path to .exe\Board95ServicePackSPx.exe"

3. Press Enter.

You can add the silent switch /s to the above command to perform a silent service pack 

installation:

1. Click Start > Run and type CMD.

2. A DOS window opens.

3. Type the following command line (including quotation marks):

"Path to .exe\Board95ServicePackSPx.exe" /s

4. Press Enter.

NOTES 

•

You can copy the Board95ServicePackSPx.exe file to any accessible network server and run 

the command from that location.

•

Don’t use any other options.

•

You can’t use a command line to remove a service pack. To remove a service pack, you must 

remove SMART Board software, using Windows Control Panel or a command line (see 

page 19), and then reinstall the original software.