Beko GNE114632X Manual De Usuario

Descargar
Página de 137
EN
13
Electric connection
Connect your refrigerator to a 
grounded socket which is being 
protected by a fuse with the 
appropriate capacity.
Important:
•  The connection must be in
compliance with national regulations.
•  The power cable plug must be easily
accessible after installation.
•  Voltage and allowable fuse protection
are specified in the “Technical 
Specifications” section.
•  The specified voltage must be equal
to your mains voltage.
•  Extension cables and multiway plugs
must not be used for connection.
B  A damaged power cable must be 
replaced by a qualified electrician.
B  The appliance must not be operated 
before it is repaired! There is danger 
of electric shock!
Disposing of the packaging
The packing materials may be 
dangerous for children. Keep the 
packing materials out of the reach 
of children or dispose them of by 
classifying them in accordance 
with the waste instructions. Do not 
dispose them of along with the normal 
household waste.
The packing of your refrigerator is 
produced from recyclable materials.
Disposing of your old 
refrigerator
Dispose of your old machine without 
giving any harm to the environment.
•  You may consult your authorized
dealer or waste collection center of 
your municipality about the disposal 
of your refrigerator.
Before disposing of your refrigerator, 
cut out the electric plug and, if there 
are any locks on the door, make them 
inoperable in order to protect children 
against any danger.
Placing and Installation
Caution: Never plug the refrigerator 
into the wall outlet during installation. 
Otherwise, risk of death or serious 
injury may arise.
If the entrance door of the room where 
the refrigerator will be installed is not 
wide enough for the refrigerator to 
pass through, than call the authorized 
service to have them remove the 
doors of your refrigerator and pass it 
sideways through the door.