Beko CFD6914X Manual De Usuario

EN

10

6. Refer to cleaning and care section 
to prepare your appliance for use.
7. A special receptacle is supplied to 
store the mains plug during transit. 
The receptacle is fixed at the back 
of the cabinet, on the side of the 
compressor. (See diagram) Gently 
remove the plug from the receptacle. 
Never pull the mains cord, you may 
damage the appliance. In the case 
of transportation, ensure you locate 
the plug in the receptacle provided to 
avoid transit damage.

Should the light fail to work, proceed 
as follows.
1. Switch off at the socket outlet and 
pull out the mains plug.
• You may find it useful to remove 
shelves for easy access.

2. Use a flat tipped screwdriver to 
remove the light diffuser cover by 
inserting the blade in each of the two 
recesses to prise off each side.

3. First check that the bulb  hasn’t 
worked loose by ensuring it is screwed 
securely in the holder. Replace the 
plug and switch on. If the bulb works, 

replace the light cover by inserting the 
rear lug and pushing up to locate the 
front two lugs.

4. If the light still fails to work, switch 
off at the socket outlet and pull out 
the mains plug. Replace the bulb with 
a new 15 watt (max) screw cap (SES) 
bulb.

5. Carefully dispose of the burnt-out 
light bulb immediately. Replacement 
light bulb can easily be obtained from 
a good local electrical or DIY store.