Cisco Systems 1.2 Manual De Usuario
• The Cisco UCS domain must be able to communicate with the SAN storage device that hosts the operating
system image.
• A boot target LUN on the device where the operating system image is located.
SAN boot is not supported on Gen-3 Emulex adapters on Cisco UCS blade & rack servers.
Note
Configuring a SAN Boot for a Boot Policy
Procedure
Step 1
On the menu bar, click Servers.
Step 2
In the Navigation Pane, expand Servers > Policies > root.
If you want to create or access a policy in a sub-organization, expand Sub-Organizations >
Organization_Name.
If you want to create or access a policy in a sub-organization, expand Sub-Organizations >
Organization_Name.
Step 3
Expand Boot Policies.
Step 4
Click the boot policy for which you want to configure a SAN boot.
Step 5
In the Work pane, on the General tab, click Add SAN Boot.
Step 6
In the Add SAN Boot dialog box, enter the vHBA and choose primary or secondary from the Type drop-down
list.
list.
Step 7
Click OK to close the dialog box.
Step 8
Click Save to save the boot policy.
Adding a SAN Boot Target
You must have configured a SAN boot for a boot policy before you can add a SAN boot target.
Procedure
Step 1
On the menu bar, click Servers.
Step 2
In the Navigation Pane, expand Servers > Policies > root.
If you want to create or access a policy in a sub-organization, expand Sub-Organizations >
Organization_Name.
If you want to create or access a policy in a sub-organization, expand Sub-Organizations >
Organization_Name.
Cisco UCS Central Software User Manual, Release 1.2
248
Server Policies
SAN Boot