Cisco Systems 1.2 Manual De Usuario
Configuring Fault Policy
Procedure
Step 1
On the menu bar, click Administration.
Step 2
In the Navigation pane, click General.
Step 3
In the Work pane, click Fault Policy.
Step 4
In the Actions area, complete all the fields.
Step 5
Click Save.
What to Do Next
Configuring Export Policy
Procedure
Step 1
On the menu bar, click Administration.
Step 2
In the Navigation pane, click General.
Step 3
In the Work pane, click TFTP Core Export Policy.
Step 4
In the Actions area, complete all the fields.
Step 5
Click Save.
IPv6 Configuration
You can enable IPv6 on Cisco UCS Central in the standalone and High Availability (HA) modes. Cisco UCS
Central configured on a single virtual machine is a standalone setup. A standalone setup is not part of any
cluster. A UCS Central HA setup comprises two virtual machines, also known as primary node and secondary
node respectively.
Central configured on a single virtual machine is a standalone setup. A standalone setup is not part of any
cluster. A UCS Central HA setup comprises two virtual machines, also known as primary node and secondary
node respectively.
These virtual machines form an HA cluster, which is accessed through a common IP address. This IP address
is known as a cluster IP address or a virtual IP address. You can assign an IPv6 address to the virtual IP
Address (VIP) in addition to the IPv4 address.
is known as a cluster IP address or a virtual IP address. You can assign an IPv6 address to the virtual IP
Address (VIP) in addition to the IPv4 address.
Configuring IPv6 in Standalone Mode
Procedure
Step 1
On the menu bar, click Administration
Step 2
In the Navigation pane, select General.
Cisco UCS Central Software User Manual, Release 1.2
23
Managing Administrative Settings
General Settings