Bunn OL20 Prospecto
BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.
Dimensions & Specifications
Bunn-O-Matic
®
Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model
Product #
Volts
Amps Tank Heater Total
Brewing
Cu.
Shipping
Cord
Watts
Watts
Capacity
Ft.
Weight
Attached
OL 20
20820.0001
120
17
1800
2050
5.1 gal./hr.
4.9
34 lbs.
No
OL 35
20820.0002
120/240
16.6
3500
3750
7.5 gal./hr.
4.9
34 lbs.
No
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
*Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
*Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Electrical: OL 20 requires 2-wires plus ground service rated 120V, single phase, 60Hz.
OL 35 requires 3-wires plus ground service rated 120/208 or 120/240V, single phase, 60Hz.
Plumbing: 10-90 psi (138-621 kPa). Supplied with
1
⁄
4
" male flare fitting.