Cadco XAF-188 Manual De Usuario

 

9

the oven is operating in the manual mode. To view the different parameters, simply press the   SELECT 
key to advance the light to the icon/operation you wish to review (Time, Temperature, Humidity).  

♦ 

If you select “Time”, the display shows the remaining time for that step.  

♦ 

If you select “Temperature”, the display will alternate between the set temperature (steady light) and 
the actual temperature (flashing light). 

♦ 

If you select “Humidity”, the display will show the percentage of humidity you originally selected for 
that step. 

 

•  There is room to save up to 70 programs in your oven’s memory for “One Touch Cooking”. Each 

program can have a maximum of 3 cooking steps. 

 

•  TO ENTER A PROGRAM INTO MEMORY:  

1.  Press the   P key. The display will read “P01”.  
2.  Select the number of the program you wish to use by pressing the   or   buttons (the program 

number will show in the display window)  

3.  Press the   SELECT key. 
4.  Set the cooking parameters (Time, Temperature, Humidity if applicable) (See MANUAL MODE 

section above.) 

5.  Save the program by pressing the   Memory key (for about 5 seconds) until you hear a tone. When 

the tone is heard, the program is saved, and the program number will appear in the display window.  

6.  You may press the   P key to go back into the manual mode at any time. 

7. 

To start the program, press the   START/STOP key.  

 

 

•  TO RECALL A PROGRAM ALREADY IN MEMORY:  

1.  Press the   P key. The display will read “P01”.   
2.  Select the number of the program you wish to use by pressing the   or   key (the program number 

will show in the display window) 

3.  To start the program, press the   START / STOP key. 

•  AUTOMATIC PRE-HEATING   

♦ 

When you activate a memorized program with the   START/STOP key, the oven will automatically 
preheat the cooking cavity and you will see no numbers in the display window, just the letters “PRE.” 

♦ 

Pre-heating temperature is equal to the set temperature plus approximately 20%. 

♦ 

When the oven reaches the pre-heating temperature, it gives a long tone. At this point, open the door, place 
the food inside the oven and close the door; your chosen program will begin cooking automatically.  

 

•  TO VIEW YOUR COOKING PARAMETERS DURING THE COOKING CYCLE:  

While the oven is in its programmed cooking cycle, it is possible to view the cooking parameters. To view 
the different parameters (Time, Temperature), simply press the   SELECT key to advance the light.  

♦ 

If you select “Time”, the display shows the remaining time.  

♦ 

If you select “Temperature”, the display will alternate between the set temperature (steady light) and 
the actual temperature (flashing light). 

♦ 

•  START / STOP COOKING CYCLE 

♦ 

To start or stop the cooking cycle, press the   START / STOP key. 

♦ 

At the end of the cooking cycle, the heating element(s) and fan(s) will stop running and a tone will 
sound for 15 seconds. The digits “0.00” will flash for 45 seconds in the display window. The original 
temperature remains as entered at the beginning of the cooking cycle and the START / STOP LED 
will remain on.  

♦ 

If during the 45 seconds of flashing digits the operator chooses to set a different time/temperature 
(using the   or  , and    SELECT keys) and begin another cook cycle, the oven will then