Blue Coat Systems SG Appliance Manual De Usuario
Volume 9: Managing the Blue Coat SG Appliance
16
Related CLI Commands for Setting the Event Logging Level
SGOS#(config event-log) level {severe | configuration | policy |
informational
| verbose}
Setting Event Log Size
You can limit the size of the appliances’s event log and specify what the appliance should
do if the log size limit is reached.
do if the log size limit is reached.
To set event log size:
1.
Select
Maintenance > Event Logging > Size
.
2.
In the
Event log size
field, enter the maximum size of the event log in megabytes.
3.
Select either
Overwrite earlier events
or
Stop logging new events
to specify the desired
behavior when the event log reaches maximum size.
4.
Click
Apply
.
Related CLI Commands to Set the Event Log Size
SSGOS#(config event-log) log-size megabytes
SGOS#(config event-log) when-full {overwrite | stop}
Enabling Event Notification
The SG appliance can send event notifications to Internet e-mail addresses using SMTP.
You can also send event notifications directly to Blue Coat for support purposes. For
information on configuring diagnostic reporting, see
You can also send event notifications directly to Blue Coat for support purposes. For
information on configuring diagnostic reporting, see
Table 2-1. Event Logging Level Options
severe
Writes only severe error messages to the event log.
configuration
Writes severe and configuration change error messages to the event log.
policy
Writes severe, configuration change, and policy event error messages to
the event log.
the event log.
informational
Writes severe, configuration change, policy event, and information error
messages to the event log.
messages to the event log.
verbose
Writes all error messages to the event log.