Black Box ET1000A Manual De Usuario
Editing Configurations
EncrypTight User Guide
119
Figure 37
Change Management IP window
Related topics:
●
●
●
Changing the Address in ETEMS
If the management IP address has been changed directly on the appliance, you need to update the address
in the ETEMS configuration.
in the ETEMS configuration.
For ETEP 1.6 and later appliances, you can edit the management port IP address directly in the appliance
editor. For other appliance models, use the following procedure.
editor. For other appliance models, use the following procedure.
To update ETEMS with the appliance’s new management IP address:
1 In the Appliance Manager, select an appliance from the Appliances view.
2 On the Edit menu, click Management Address. The Change Management IP window opens.
3 In the IP Address To field, type the management port IP address.
4 In the Subnet Mask To field, confirm the subnet mask and change if necessary.
5 In the Default Gateway To field, confirm the default gateway and change if necessary.
6 Click Finish. After a few seconds ETEMS displays an “Operation Failed” message (
1 In the Appliance Manager, select an appliance from the Appliances view.
2 On the Edit menu, click Management Address. The Change Management IP window opens.
3 In the IP Address To field, type the management port IP address.
4 In the Subnet Mask To field, confirm the subnet mask and change if necessary.
5 In the Default Gateway To field, confirm the default gateway and change if necessary.
6 Click Finish. After a few seconds ETEMS displays an “Operation Failed” message (
7 Click OK to update ETEMS with the appliance’s new management IP address.