Black Box ET1000A Manual De Usuario
Creating a Policy: An Overview
EncrypTight User Guide
143
To create a policy:
1 In the ETEMS Appliance Manager, add PEP A and PEP B (File > New Appliance).
1 In the ETEMS Appliance Manager, add PEP A and PEP B (File > New Appliance).
In the sample illustrated in
, the management port of PEP A has the IP address
192.168.11.69 and the management port of PEP B has the IP address 192.168.11.224.
To use an appliance as an EncrypTight PEP, you need to click the Enable EncrypTight setting on the
Features tab of the New Appliance editor. Other settings are also strongly recommended, as discussed
in
To use an appliance as an EncrypTight PEP, you need to click the Enable EncrypTight setting on the
Features tab of the New Appliance editor. Other settings are also strongly recommended, as discussed
in
.
NOTE
Although you can create networks and other elements in ETPM, no ETPM data is saved until you add
at least one PEP in the ETEMS Appliance Manager.
at least one PEP in the ETEMS Appliance Manager.
2 In the Appliance Manager, select PEP A and PEP B and push the configurations to the PEPs (Tools >
Put Configurations). A reboot is not required for ETEP PEPs.