Delta Electronics 115V Series Manual De Usuario

Chapter 1 Introduction|VFD-S Series 

1-4 

 Revision August 2006, SE08, SW V2.61

DIVISION 
PLATE

SCREW

 

Reinstall Division Plate. 
Screw Torque: 5 to 6 kgf-cm (4.3 to 5.2 in-lbf)

 

SCREW

SCREW

CONDUIT

BRACKET

 

Install Conduit Bracket cover and tighten screws. 

 

The AC motor drive should be kept in the shipping carton or crate before installation. In order to 

retain the warranty coverage, the AC motor drive should be stored properly when it is not to be used 

for an extended period of time. Storage conditions are: 

Store in a clean and dry location free from direct sunlight or corrosive fumes. 

Store within an ambient temperature range of -20

 °

C to +60

 °

C. 

Store within a relative humidity range of 0% to 90% and non-condensing environment. 

Store within an air pressure range of 86kPa to 106kPa.

 

 

1. 

DO NOT store in an area with rapid changes in temperature. It may cause condensation and 

frost. 

2. 

DO NOT place on the ground directly. It should be stored properly. Moreover, if the surrounding 

environment is humid, you should put exsiccator in the package.