Chicago Electric 68886 Manual De Usuario

Page 16

SKU 68886 

        

Overload Indicator:   

This lights up if duty cycle work period is exceeded, 

resulting in overheating the welder.   

Rest the Torch on an electrically non-conductive, 

heat-resistant surface, such as a concrete slab, well 

clear of the ground clamp while allowing the welder 

to cool with the Power Switch on, so the Fan can 

help cool the welder.  Once the welder cools enough 

to be used again, use shorter welding periods and 

longer rest periods to prevent needless wear.
Power Switch:   

This turns on power to the welding Torch and 

internal cooling fan.  The welding Torch is 

energized whenever the Power Switch is on.
Current Switch:   

This controls the output amperage of the welder.   

Adjust this according to the weld settings 

chart to achieve a good weld.

Wire Speed Dial:   

This controls the speed that the welding wire 

feeds out of the welding Torch and 

adapts output amperage somewhat.   

Adjust this according to the weld settings 

chart to achieve a good weld.
Power Cord:   

Plug the Power Cord into a properly grounded 

240 V~ (at least 30 amp rating) outlet with 

delayed action type circuit breaker or fuses.
Torch Cable:   

The welding Torch connects here.   

The wire and welding current feeds to 

the weld through here.  The welding Torch is 

energized whenever the Power Switch is on.
Ground Cable:   

This connects to the base metal to provide a good 

connection for the current to travel back to the welder.

MIG 180

WIRE FEED WELDER

240V~