LightSpeed Technologies 20XLc Prospecto
15XLc and 20XLc THREE YEAR LIMITED WARRANTY TO ORIGINAL PURCHASER
The LightSPEED 15XLc and 20XLc Aviation Headsets are guaranteed against malfunction due to defects in materials and workmanship for a period of 3
years, beginning at the date of original purchase. If such a malfunction occurs, the product will be repaired or replaced (at our option) without charge
during the period and under the limitations stipulated in the data sheet or owner’s manual (if any) for that individual product. If delivered prepaid to the
LightSPEED warranty ser vice center, the unit will be returned prepaid. Warranty does not extend to finish, appearance items, or malfunctions due to
abuse or operation other than specified conditions, nor does it extend to incidental or consequential damages, so the above exclusion may not apply to
you. Repair by other than LightSPEED or its authorized ser vice agencies will void this guarantee. Information on authorized ser vice agencies is available
from LightSPEED Aviation.
years, beginning at the date of original purchase. If such a malfunction occurs, the product will be repaired or replaced (at our option) without charge
during the period and under the limitations stipulated in the data sheet or owner’s manual (if any) for that individual product. If delivered prepaid to the
LightSPEED warranty ser vice center, the unit will be returned prepaid. Warranty does not extend to finish, appearance items, or malfunctions due to
abuse or operation other than specified conditions, nor does it extend to incidental or consequential damages, so the above exclusion may not apply to
you. Repair by other than LightSPEED or its authorized ser vice agencies will void this guarantee. Information on authorized ser vice agencies is available
from LightSPEED Aviation.
LightSPEED 15XLc and 20XLc are trademarks of LightSPEED Aviation, Inc. © 2004 LightSPEED Aviation. PRINTED IN U.S.A. All rights reserved.
Ear Shape / Size and the
Opening of the Ear Seal
Opening of the Ear Seal
The seal opening is designed to fit comfor tably around
most ears. Care should be taken to make sure each ear
is completely inside the seal…not pinched underneath!
If necessar y, adjust the domes slightly to make sure the
ear lobes are tucked up inside the ear seals. With the
ears fully enclosed, the domes can deliver maximum
comfor t and attenuation.
most ears. Care should be taken to make sure each ear
is completely inside the seal…not pinched underneath!
If necessar y, adjust the domes slightly to make sure the
ear lobes are tucked up inside the ear seals. With the
ears fully enclosed, the domes can deliver maximum
comfor t and attenuation.
Dome
Headset rests at
center of head
Minimal
pressure on jaw
Height Adjustment
Optimal fit is achieved by:
(1) Getting your ears positioned INTO the dome as described above.
(2) Holding either dome with one hand, slide the dome up the stirrup
rails until domes are slightly above your jawbone.
(3) Repeat this for the other dome. When completed, there should be
just a slight upward pressure on the bottom of your ear lobe.
Mic Positioning
The microphone element has a front and a back. Speak into the side that
says ‘TALK’ (see Fig. 1). The microphone is positioned for use on your left
side. The back side has an adjustable ‘GAIN’ pot. It is preset at our facility
for optimal performance. Should you need to adjust the output, contact
LightSPEED Aviation, Inc.
says ‘TALK’ (see Fig. 1). The microphone is positioned for use on your left
side. The back side has an adjustable ‘GAIN’ pot. It is preset at our facility
for optimal performance. Should you need to adjust the output, contact
LightSPEED Aviation, Inc.
‘Talk’
T
A
L
K
Microphone
Fig. 1
www.anrheadsets.com
15954 SW 72nd Avenue Por tland, Oregon USA 97224 800.332.2421 503.968.3113 fax: 503.968.7664
Adjustable
Stirrup
Rails
Stirrup
Rails