Echo SRM-225 Manual De Usuario

SRM-225

OPERATION

X7722271109

OPERATION

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause
unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit
so that exhaust is directed away from your face and body.

Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if
the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or
regulations regarding fire prevention requirements.

Operation With Blades

Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, barrier
bar or U-handle, and harness can result in serious personal injury. Follow installation instructions.

DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS.

• Arbor Diameter of Upper Blade Plate must match arbor diameter of blades.

• New cotter pin required each time blade is installed.

• Brush cutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness.

TO USE

THESE

BLADES

Pro Maxi-Cut

Grass/Weed

Blade

Rigid Plastic

Tri-Cut

Grass/Weed Blade

Metal Blade

You

must

install

these

parts!

Support Handle, w/or

w/o Barrier Bar

U-Handle or Support

Handle

w/Barrier Bar

U-Handle or Support

Handle

w/Barrier Bar

Plastic Shield

Metal Shield

Harness

Upper Plate &

Flat Washer

Upper Plate

& Glide Cup

Upper/Lower

Blade Plates

Hex Nut

New Cotter Pin