Chicago Electric 94882 Manual De Usuario
SKU 94882
PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures,
parts list and assembly diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep this manual and
invoice in a safe and dry place for future reference.
parts list and assembly diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep this manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
accidents.
Electrical Requirement
120 Volt / 60 Hz / 16 Amps (running)
Impactor Travel
2-3/8”
Overall Dimensions
25” L X 10-7/8” W X 9-3/8” H (hammer only)
Blows per minute
1100 - 2100
Retainer Style
Spring loaded rotational lock (2 positions only)
Retainer Capacity
3/4” (19mm)
Bit hardness
46-56 HRC
Bit Dimensions:
Chisel Bit: 3/4” Shank X 14-1/4” L
Bull Point Bit: 3/4” Shank X 1” W X 14-1/4” L
Bull Point Bit: 3/4” Shank X 1” W X 14-1/4” L
Noise Level
88 DBa @ 3 feet
Impact Energy
3.7 to 18.4 Ft/Lbs.
Tool Weight
33.75 Lbs.
NOTE: Plug this tool into a 20 Amp. dedicated circuit.
REV 07e, 08b