Harbor Freight Tools 94665 Manual De Usuario
SKU 94665
For technical questions, please call 1-800-444-3353
Page 3
7.
Use eye and ear protection. Always wear ANSI-approved impact safety
goggles. Wear a full face shield if you are producing metal filings or wood
chips. Wear an ANSI-approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
chips. Wear an ANSI-approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
8.
Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
9.
Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and, if damaged, have them repaired by an
authorized technician.
Inspect tool cords periodically and, if damaged, have them repaired by an
authorized technician.
10. Disconnect power. Unplug drilling tool (not supplied) when not in use.
11. Remove adjusting keys and wrenches. Check that keys and adjusting
wrenches are removed from the tool or machine work surface before
plugging in drilling tool (not supplied).
plugging in drilling tool (not supplied).
12. Avoid unintentional starting. Be sure the switch of the drilling tool (not
supplied) is in the Off position when not in use and before plugging in. Do not
carry any tool with your finger on the trigger, whether it is plugged in or not.
carry any tool with your finger on the trigger, whether it is plugged in or not.
13. Stay alert. Use common sense. Do not operate any tool when you are tired.
14. Take caution as some woods contain preservatives such as copper
chromium arsenate (CCA) which can be toxic. When cutting these
materials, care should be taken to avoid inhalation and minimize skin contact.
materials, care should be taken to avoid inhalation and minimize skin contact.
15. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use a
drilling tool (not supplied) if any switch does not turn On and Off properly.
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use a
drilling tool (not supplied) if any switch does not turn On and Off properly.
16. Guard against electric shock. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
17. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
accessories intended for use with this tool. Approved accessories are
available from Harbor Freight Tools.
18. Do not operate if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes
are impaired while taking drugs. If there is any doubt, do not operate the tool.
are impaired while taking drugs. If there is any doubt, do not operate the tool.