Fujitsu CM25-00322-1E Manual De Usuario
70
CHAPTER 3 Windows
3.10
Register Window
The Register Window is used to display and modify MCU register values during
debugging. This window is displayed only when SOFTUNE WORKBENCH is in the
debug session.
debugging. This window is displayed only when SOFTUNE WORKBENCH is in the
debug session.
■ Register Window
Figure 3.10-1 is an example of the Register Window. When debugging, the Register Window displayed the
register values. Register values can be rewritten directly. To rewrite values using expressions and symbols,
etc., select [Edit] from the shortcut menu for the Register Window.
Arrange registers according to the size of the Register Window.
To select the registers to be displayed, select [Display Setup] from the shortcut menu for the Register
Window.
Figure 3.10-1 Example of Resister Window
■ Shortcut Menu
- Setup Setup See Section 3.10.1 Setting Register Display.
- Edit Displays Register Edit Dialog Box.
- Close Closes Register Window.
- Edit
Edits register values. Beside this operation, the numerical values displayed in the Register Window can
be directly edited. See Section 4.4.4 Register.
1. Click the right button of the mouse in the Register Window to display the shortcut menu, then select
[Edit] from the menu.
The register edit dialog box opens.
2. Select a register name.
3. Enter the value you want to set.
4. Click the [OK] button.
Each condition flag status is
displayed; it can be also changed.
Register names and values are
displayed. A displayed register
value can be rewritten by entering
a new value.