Omega OM-USB-1208FS Manual De Usuario
OM-USB-1208FS User's Guide
Installing the OM-USB-1208FS
10
Installing the software
Refer to the OMB-DAQ-2416 Series and OM-USB Series Data Acquisition Software User’s Guide for
instructions on installing the software on the OMB-DAQ-2416 Series and OM-USB Series Data Acquisition
Software CD. This booklet is available in PDF at
instructions on installing the software on the OMB-DAQ-2416 Series and OM-USB Series Data Acquisition
Software CD. This booklet is available in PDF at
We recommend that you download the latest Windows Update onto your computer before installing and
operating the OM-USB-1208FS.
operating the OM-USB-1208FS.
Installing the hardware
Be sure you are using the latest system software
Before you install your OM-USB-1208FS, run Windows Update to update your operating system with the latest
HID and USB drivers.
HID and USB drivers.
To connect the OM-USB-1208FS to your system:
Turn your computer on, and connect the USB cable to a USB port on your computer or to an external USB
hub that is connected to your computer.
The USB cable provides power and communication to the OM-USB-1208FS.
When you connect the OM-USB-1208FS for the first time, a series of
Found New Hardware
popup balloons
(Windows XP) or dialogs (other Windows versions) opens as the OM-USB-1208FS is detected by your
computer. This is normal. The last popup balloon or dialog states "Your new hardware is installed and ready to
use," and the LED on the OM-USB-1208FS should flash and then remain lit. This indicates that communication
is established between the OM-USB-1208FS and your computer.
computer. This is normal. The last popup balloon or dialog states "Your new hardware is installed and ready to
use," and the LED on the OM-USB-1208FS should flash and then remain lit. This indicates that communication
is established between the OM-USB-1208FS and your computer.
You can install up to two OM-USB-1208FS units on most computers. If you need to connect more than two
OM-USB-1208FS units to your computer, contact Tech Support by phone, fax, or e-mail:
OM-USB-1208FS units to your computer, contact Tech Support by phone, fax, or e-mail:
Caution! Do not disconnect any device from the USB bus while the computer is communicating with the
OM-USB-1208FS, or you may lose data and/or your ability to communicate with the OM-USB-
1208FS.
1208FS.
If the LED turns off
If the LED is illuminated but then turns off, the computer has lost communication with the OM-USB-1208FS.
To restore communication, disconnect the USB cable from the computer, and then reconnect it. This should
restore communication, and the LED should turn back on.
To restore communication, disconnect the USB cable from the computer, and then reconnect it. This should
restore communication, and the LED should turn back on.